Products

Foster Cyclone Dust Collector

Foster Cyclone Dust Collector has a very quiet 1 horse power motor. The Cyclone Dust Collector has 112 cfm suction power and has economical, disposable paper primary filter. The Cyclone Dust Collector retains 3 micron and larger particles and has a permanent cloth secondary filter. The Dust Collector has 2 station capability and is supplied with (1) 7' X 2 ½" ID vacuum hose and (4) extra disposable paper dust bags. The Cyclone Dust Collector uses 1 ½", 2 ½" or 3" ID hose for adaptability to nearly every dust collection devise and the noise produced is 59db.

$459.00

Foster Cylone Deluxe Dust Collector

Foster Cyclone Deluxe Dust Collector features a two stage, ultra-quiet, by-pass motor suitable for use with abrasive blasters. The Cyclone Deluxe Dust Collector also includes a remote foot switch, mobile cart, and one 6' hose. The Cyclone Deluxe Dust Collector will require an additional extra hose to run dual stations and the noise produced by this machine is 55db.

$549.00

Harris Super Vac Dust Collector

The Harris Super Vac dust collector comes with 116 CFM and 1 HP 64db. The Super Vac is 23"H X 17"D. The Super Vac also has pleated paper cartridge filter, disposable filter bag and is certified for dust collection of abrasives. The Super Vac has automatic on/off and a 1 year warranty.

$399.00

Handler 550 Porta Vac Dust Collector

Replaces the traditional Model #66 Porta Vac.  It is for bench top light grinding and polishing with a HP or Lathe.  Removable plastic resin clean out tray, replaceable clear acrylic shield, reusable and replaceable pleated rear filter.  Comes with flourescent lighting.  Certified for stone and abrasives.8.5in W  x 12in H  x 14in D
$299.00

Handler 60UFC Brushless Dust Collector

16" W x 14" D x 22" H

87lbs

1/2 hp / 400 cfm

Filter to .05 micron

Comes with hoses and 2 fishmouths

Approved for all applications

Drum cartridge dust filter and collection tray

$639.00

Handler 60U Brushless Dust Collector

16" W x 14" D x 22" H

87lbs

1/2 hp / 400 cfm

Filter to .05 micron

Comes with hoss and 2 fishmouths

Not approved for abrasives

Hanging Cloth sateen filter bags.

$651.75

Handler 101 Dust Collector

Handler 101 Dust Collector has a 1 HP motor with 115/220 Volts, 60 Hz, 1 Phase. The Handler 101 has the following dimensions: 22" W x 24" D x 41" H. It has four 3" suction inlets flanges-two mounted on each side of unit. Special inlet adapter supplied on request. The 101 Dust Collector has 800 C.F.M. thru Inlets provided.

$1699.00

Handler 103 Dust Collector

Handler 103 Dust Collector has a 3 HP motor with 115/220 Volts, 60 Hz, 1 Phase. The 103 Dust Collector has the following dimensions: 29" W x 24" D x 57" H. It has four 3" suction inlets flanges-two mounted on each side of unit. The 103 Dust Collector has 1250 C.F.M. thru Inlets provided.

$2339.00

Handler 105 Dust Collector

Handler 105 Dust Collector has a 5 HP motor with 208-220/440 Volts, 60 Hz, 3 Phase. The 105 Dust Collector has the following dimensions:  45 1/2" W x 36" D x 80" H. The 105 Dust Collector has 1800 C.F.M. thru Inlets provided.  The suction inlets flanges on cabinet, Flanges available in 3" to 7" round or 3 1/4" x 10" rectangular.
$4349.00

Handler 562-XUV Dust Collector

Handler 562-XUV Dust Collector provides a powerful suction for two workstations for continual operation. The 562-XUV has a ½ hp ball bearing, a capacitor start and a brushless motor. Unit draws 500+CFM and filters .5 microns and larger particles. The 562-XUV is certified for use with all abrasives and includes two 3"D X 4"L flex house and two fishmouths.
$1049.00

Quatro Jet Stream Dust Collector

The Jet Stream Compact series Dust Collector from Quatro is a space saving - portable modular design with health smart anti-microbial deluxe filter bag. The Jet Stream is a true HEPA filtration system with medical grade 0.3 sub-micron filter capabilities. It has electrostatic action that collects dust like a magnet and is suitable for all materials including abrasives. The Jet Stream is designed for two stations with simultaneous use and has ultra quiet efficient performance. Included with the Jet Stream is one anti-microbial deluxe filter bag, true HEPA medical grade 0.3 sub micron filter , long double density "ultra-flex" suction hose for use with two stations (2 ea. hose), end adapters 1.5" to 2.5" (1 ea.), "T" connector for two station use and power-line cord.
$559.00

Quatro Velocity Brushless Dust Collector

The Velocity Brushless Sub-Micron Dust Collector is suitable for any material including aluminum oxide, sand, quartz, glass beads, gypsum, die-stone, ceramics, resins and acrylics. The Velocity is capable of 1,609 m/min and has sub-micron dust collection filtration down to 00.3 microns. The Velocity Dust Collector is brushless, bag-less and has a maintenance free industrial motor. It includes a standard 2 year warranty and has three CE certified models available to meet every need. Prices starting at:
$729.00

Renfert Vortex Dust Collector

Renfert Vortex Dust Collector has variable speeds and is an effective abrasive removal system. The Vortex Dust Collector produces 62 db of noise and includes brushes. The Vortex Dust Collector has a standard 1 year warranty. The Vortex Dust Collector has the following dimensions: 19X17X17.

$684.85

Renfert Silent Extractor Dust Collector

Renfert Silent Extractor Dust Collector has 9 extraction levels with a noise production of 56db. The Silent Extractor Dust Collector has easy change filter bay, 2 stations, and can be used for light stone dust.

The Silent Extractor Dust Collector is certified for abrasives and has a two stage filter with fine dust precipitation efficiency of 99%. The Silent Extractor Dust Collector has the following dimensions: 23.4" H X 8.8" W X 22.2" D.

$1555.99

Vaniman Sand Vac Dust Collector

Vaniman Sand Vac Dust Collector has a single station with a 3/4 hp motor. The Sand Vac Dust Collector is designed for use with heavy duty sandblasting and aluminum oxide as well as other abrasives. The dimensions of the Sand Vac Dust Collector are as follows: 14"W X 10" D X 12" H. The Sand Vac Dust Collector collects 99.99% of all dust (filter rated of 95% at 1 micron). The Sand Vac Dust Collector comes with large accumulator and foot remote pedal. It has a standard 1 year warranty.

$629.00

Vaniman Stone Vac II Dust Collector

Vaniman Stone Vac II Dust Collector comes with a connection to attach to an optional on/off table top remote switch or foot pedal. The Stone Vac II Dust Collector is intended to be used in conjunction with the general purpose Van-I-Vac and Voyager Dust Collectors. The Stone Vac Dust Collector utilizes special filtration and die stone dust extraction as well as advanced fluted filter that collects 99% of all die stone dust. The Stone Vac II Dust Collector features a built in one-touch filter cleaning system which removes die stone from a filter cartridge and collected in a collection bag for disposal. The Stone Vac II Dust Collector has 110CFM, 1 hp motor and 57db. It has the following installed dimensions: 10"W X 15"D X 24.5"H.

$799.00

Vaniman Stone Vac II Plus Dust Collector

Vaniman Stone Vac II Plus Dust Collector comes with a connection to attach to an optional on/off table top remote switch or foot pedal. The Stone Vac II Dust Collector is intended to be used in conjunction with the general purpose Van-I-Vac and Voyager Dust Collectors. The Stone Vac II Dust Collector utilizes special filtration and die stone dust extraction as well as advanced fluted filter that collects 99% of all die stone dust. The Stone Vac II Dust Collector features a built in one-touch filter cleaning system which removes die stone from a filter cartridge and collected in a collection bag for disposal. The Stone Vac II Dust Collector has 110CFM, 1 hp motor and 57db. It has the following installed dimensions: 10"W X 15"D X 23"H.

The Stone Vac II Plus Dust Collector comes with a built-in autopilot micromotor control. With the Stone Vac II Dust Collector the micromotor coordinates with the unit to allow for optimal use of this system. The Stone Vac II Dust Collector insures that airborne die stone particles are removed from the air in a more efficient manner.

$989.00

Vaniman Stone Vac II Brushless Dust Collector

Vaniman Stone Vac II Brushless Dust Collector has no replacement of brushes for a much lower maintance. The Stone Vac II Dust Collector has addition suction which is 25% greater than the standard StoneVac II. The Stone Vac II Dust Collector can be operated in a one or two workstation configuration and will withstand die stone and abrasives. The Stone Vac II Dust Collector has the following dimensions: 10"W X 15"D X 24.5"H.

$1200.00

Vaniman V Six

Can accomodate six workstations.  The suction ports can be onfigured for either 4 x 21/2", 2 x 3" or 1 x 4" hoses.  Costomer should consult with Vaniman for proper set up.  59db, brushless motor, variable speed, and hepa filter.  It is certified for use for stone and abrasives.  The unit measures 20"W x 20"D x 36"H.   Two Year Warranty.
$2299.00

Vaniman Vanguard 1X Dust Collector

Vaniman Vanguard 1X Dust Collector has a single station and has a single speed. The Vanguard 1X Dust Collector has no accumulator and replaces the V150 and V130 units. The Vanguard 1X Dust Collector has a quieter operation and captures 99% of all dust. The Vanguard 1X Dust Collector has the following installed dimensions: 14"L X 10"W X 12"H. The Vanguard 1X Dust Collector includes 1 hose at 1 ½", maximum length 6 feet and a standard 1 year warranty.

$579.00

Vaniman Vanguard 1x With Accumulator

Vaniman Vanguard 1X Dust Collector has a single station and has a single speed. The Vanguard 1X Dust Collector has a pre-filtered accumulator and replaces the V150 and V130 units. The Vanguard 1X Dust Collector has a quieter operation and captures 99% of all dust. The Vanguard 1X Dust Collector has the following installed dimensions: 20"L X 10"W X 27"H. The Vanguard 1X Dust Collector includes 1 hose at 1 ½", maximum length 6 feet and a standard 1 year warranty.

$629.99

Vaniman Vanguard Gold 2X Dust Collector

Vaniman Vanguard Gold 2X Dust Collector has a single station for heavy duty use. The Vanguard Gold 2X Dust Collector has no accumulator and has 4 speeds. The Vanguard Gold 2X Dust Collector has the following installed dimensions: 14" L X 10"W X 12"H. The Vanguard Gold 2X Dust Collector includes 1 hose at 2 ½" or 2 hoses at 1 ½" and has a maximum hose length of 8 feet.

$639.00

Vaniman Vanguard Gold 2x with Accumulator Single Station

Vaniman Vanguard Gold 2X Dust Collector has a single station for heavy duty use. The Vanguard Gold 2X Dust Collector has a pre-filtered accumulator and has 4 speeds. The Vanguard Gold 2X Dust Collector has the following installed dimensions: 14" L X 10"W X 12"H. The Vanguard Gold 2X Dust Collector includes 1 hose at 2 ½" or 2 hoses at 1 ½" and has a maximum hose length of 8 feet.

$699.00

Vaniman Vanguard Gold 2X with Accumulator Dual Stations

Vaniman Vanguard Gold 2X Dust Collector has dual stations for heavy duty use. The Vanguard Gold 2X Dust Collector has a pre- filtered accumulator and has 4 speeds. The Vanguard Gold 2X Dust Collector has the following installed dimensions: 14" L X 10"W X 12"H. The Vanguard Gold 2X Dust Collector includes 1 hose at 2 ½" or 2 hose at 1 ½" and has a maximum hose length of 8 feet.

$779.00

Vaniman Vanguard Platinum 2X Dust Collector

Vaniman Vanguard Platinum 2X Dust Collector is a single station with no accumulator. The Vanguard Platinum 2X Dust Collector has variable speed, autopilot for handpiece synchronisation and automatic bag full indicator. The Vanguard Platinum 2X Dust Collector has tri-filtration built in and captures 99% of all dust. The Vanguard Platinum 2X Dust Collector includes 1 hose at 2 ½" or 2 hoses at 1 ½" and has a maximum length of hose at 8 feet.

$779.00

Vaniman Vanguard Platinum 2X with Accumulator Single Station

Vaniman Vanguard Platinum 2X Dust Collector is a single station with a pre-filtered accumulator. The Vanguard Platinum 2X Dust Collector has variable speed, autopilot for handpiece synchronisation and automatic bag full indicator. The Vanguard Platinum 2X Dust Collector has tri-filtration built in and captures 99% of all dust. The Vanguard Platinum Dust Collector includes 1 hose at 2 ½" or 2 hoses at 1 ½" and has a maximum length of hose at 8 feet.

$859.00

Vaniman Vanguard Platinum with Accumulator Dual Station

Vaniman Vanguard Platinum 2X Dust Collector has dual stations with a pre-flitered accumulator. The Vanguard Platinum Dust Collector has variable speed, autopilot for handpiece synchronisation and automatic bag full indicator. The Vanguard Platinum Dust Collector has tri-filtration built in and captures 99% of all dust. The Vanguard Platinum Dust Collector includes 1 hose at 2 ½" or 2 hoses at 1 ½" and has a maximum length of hose at 8 feet.

$879.00