Products

Call for special pricing on all Handler Dental Laboratory Equipment!!!

$CALL

Handler 60C Polishing Unit features lathe and built in dust collection system. The Handler 60C Polishing Unit has the following unit dimensions: 56"H X 18"D X 32"W. The Handler 60C Polishing Unit motor has a number 26 red wing with two speeds and the suction motor has 1/4 hp suction capacity of 500 CFM. The Handler 60C Polishing Unit is 1200 cubic inches. It has the following accessories: two aluminum shielded hoods with lights and insert pans with an overhead shelf supplied.

$1469.00

Handler 75D Polishing Unit has a suction motor with 3/4 hp and a polishing motor with a 26 red wing and 2 speed lathe. The 75D Polishing Unit has an external foot shaker, internal cabinet dust try and 600cfm suction capacity.

$2219.00

$1181.00

A bench top polishing unit designed to provide 365 CFM through two  inlets, with a 26A Red Wing Lathe. The 76D-0 is constructed of heavy gauge sheet steel, finished in a durable, baked coating. Two 10 inches x 12 inches x 2 inches replaceable filters entrap dusts as small as 5 microns.  Two aluminum pumice/polishing pans provided.  Incandescent light sockets are on the unit, but no bulbs are provided.  Not recommended for use with stone or abrasives.  29" W x 20.5" D x 13"H

$629.00

$299.00

Handler 101 Dust Collector has a 1 HP motor with 115/220 Volts, 60 Hz, 1 Phase. The Handler 101 has the following dimensions: 22" W x 24" D x 41" H. It has four 3" suction inlets flanges-two mounted on each side of unit. Special inlet adapter supplied on request. The 101 Dust Collector has 800 C.F.M. thru Inlets provided.

$1699.00

16" W x 14" D x 22" H

87lbs

1/2 hp / 400 cfm

Filter to .05 micron

Comes with hoss and 2 fishmouths

Not approved for abrasives

Hanging Cloth sateen filter bags.

$651.75

16" W x 14" D x 22" H

87lbs

1/2 hp / 400 cfm

Filter to .05 micron

Comes with hoses and 2 fishmouths

Approved for all applications

Drum cartridge dust filter and collection tray

$639.00

Handler 103 Dust Collector has a 3 HP motor with 115/220 Volts, 60 Hz, 1 Phase. The 103 Dust Collector has the following dimensions: 29" W x 24" D x 57" H. It has four 3" suction inlets flanges-two mounted on each side of unit. The 103 Dust Collector has 1250 C.F.M. thru Inlets provided.

$2339.00

Handler 105 Dust Collector has a 5 HP motor with 208-220/440 Volts, 60 Hz, 3 Phase. The 105 Dust Collector has the following dimensions:  45 1/2" W x 36" D x 80" H. The 105 Dust Collector has 1800 C.F.M. thru Inlets provided.  The suction inlets flanges on cabinet, Flanges available in 3" to 7" round or 3 1/4" x 10" rectangular.

$4349.00

Handler 562-XUV Dust Collector provides a powerful suction for two workstations for continual operation. The 562-XUV has a ½ hp ball bearing, a capacitor start and a brushless motor. Unit draws 500+CFM and filters .5 microns and larger particles. The 562-XUV is certified for use with all abrasives and includes two 3"D X 4"L flex house and two fishmouths.

$1049.00

Handler 211 Tech-Rite Bench five drawer technician’s bench with resistop. Resistop is similar to man made slate. Available in charcoal gray color. The 211 Bench is built of heavy gauge sheet steel with heavy gauge tubular steel legs, the 211 is shipped complete with four legs with leg levelers, duplex electrical outlet, suction inlet and knock-outs for air and gas valves. Finished in baked durable coating.

$1379.00

The Handler 213 Ceramist Bench has seven drawers and is designed particularly for the ceramist. In addition to the two larger side drawers which will accommodate large porcelain jars, its side cabinet contains a hinged door and compartment for a vacuum pump or other accessories. The side cabinet is shipped for assembly on the right side of the bench. The 213 Bench is built of heavy gauge sheet steel, the Tech-Rite Ceramist Bench is shipped complete with legs, duplex electrical receptacle, suction inlet and knock-outs for air and gas valves. Finished in baked, durable coating with Resistop tops.

$2149.00

The Handler 215 SP Single Pedestal Bench is a five drawer single technicians bench with Resistop tops. The 215 SP Bench is supported by a single 14" deep x 42" wide single pedestal. The single pedestal bench is 42" wide x 24 1/2" deep x 31 3/4" to work surface. The 215SP contains a 42" wide x 6 1/2" deep x 6" high riser mounted rear with one duplex receptacle, suction inlet and knock outs for air and gas valves in the vertical riser. It must be secured to the wall of the laboratory or installed to the floor as a free standing bench. Constructed of heavy gauge sheet steel and finished in a baked, durable coating.

$1549.00

Handler 215 Pedestal Bench finished in baked, durable coating. A two technician pedestal bench contains five drawers for each technician. Benches are mounted face to face, supported by 42" wide x 17 3/4" deep pedestal with common 13" riser top. Constructed of heavy gauge sheet steel. Supplied with Resistop tops. The top containing a duplex receptacle, suction inlet and knock-outs for air and gas valves on both sides.

$2729.00

Handler 311 Master Technicians Bench is the ultimate bench for the accomplished technician. Constructed of heavy gauge sheet steel, this bench is 74" wide x 24 1/2" deep x 32" high to the work surface. The 311 bench contains thirteen drawers, a 36" electrical strip, 3" suction inlet, air and gas valves and a Resistop work surface. Finished in a baked, durable coating. The work area is designed to provide maximum work space for supervision and teaching. Unit contains a 74" wide x 6 1/2" deep x 6" high vertical riser mounted in rear of the bench.

$2649.00

Comes with: 19'' wide screen flat panel, data port, I pod jack and ear phone jack. Suction and in drawer inlet with safety shield and magnifier.  Duplex electrical outlet which are pre-wired to a 110 3 prong cord. Gas valve, Air Valve with air hose and air gun.  Fluorescent task lightening, work shelf and 6 drawers

$3059.00

Handler 231 Plaster Bench is a seven foot bench built for use as a plaster bench. Bench contains one 35" double door cabinet, one 24" single door cabinet and one 24" four drawer cabinet combined. Cabinet top covered with Resistop, built-in 14" x 14" x 6 1/2" deep stainless steel sink with chrome plated mixing faucet, and adjacent plaster (waste) chute. 231 Bench constructed of heavy gauge sheet steel finished in a durable, baked coating. The 231 Bench has the size is 83 3/8" wide x 24" deep x 36 3/4" high to work surface.

$3539.00

235 Casting/Soldering Bench is a seven foot long bench designed for casting and soldering. The 235 bench consists of one 35" double door cabinet, one 24" single door cabinet and one 24" single door cabinet with tool area above door lined with transite for placement of torches and tools. The 235 cabinet’s work surface is covered with Resistop material and contains a cut-out with casting well. The cabinet size is 84" wide x 23 3/4" deep x 36 3/4" high to work surface. Available with 6" high riser in lieu of back splash making bench 29" in depth. The casting well sits 18" wide and 14" deep. Constructed of heavy gauge sheet steel and finished in a durable baked coating.

$3539.00

DEXTERITY 2000 Workstation is a new workstation to satisfy the ergonomic requirements of the laboratory technicians. Two styles are offered: a mechanically adjustable bench and an electrically adjustable bench. The Dexterity 2000 Workstation is a modern, practically designed bench which is sturdy, comfortable, and durable. Workstations available in 42",48" and 60" wide at. Varying widths are available on special order. Various substraights available for tops.

$2429.00

Measurements:  21"W x 18"H x 10"D

Capacity:  25# Each compartment

$199.00

Handler 87 Fishmouth with Blast Gate is used with handpiece or bench motor in lieu of splash hood supplied with 3" flange and cut-out for connecting to suction. It is made of heavy guage sheet steel and textured beige enamel.

$73.00

210T In-Drawer Suction Attachment is designed to be placed in the center drawer of a technicians bench. The 210T is complete with clear acrylic Sta-Kleen shield, this delivers suction to users of handpieces while protecting technician from grinding and polishing dusts created by the handpiece. The two trays located on either side of the suction area hold burs, mandrels and mounted points when not in use. Shipped in a durable, baked finish. Please specify if special color required.

$285.00

Handler 33 little Giant Press is a flask press manufactured for pressing a single flask. It is constructed of malleable/ductile iron and The Little Giant will provide years of trouble free service under normal pressing procedures.

$97.00

38A Bench Clamps are for use in mounting Nos 33, 38, 38A presses to tabletop. The 38a Press Clamp Set is casted out of aluminum alloy for rustproof protection. Shipped with mounting screws.

$21.99

26A Red Wing Lathe is a full 1/4 HP, 1725/3450 rpm lathe for use on top of laboratory bench (115 Volts/60Hz). The 26A Lathe has a 4 1/2" shaft height which allows easy use by the technician with hands resting on the tabletop. Shipped with standard dental, tapered shafts, each lathe includes a right and left chuck remover, which provides ease of removal of standard dental chucks. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding. This unit may be supplied with 1/2" straight shafts when specified.

$258.99

The 18B Red Wing Lathe has a Quick Chuck and a 6" shaft height that allows larger diameter wheels to be used and allows easy use by the technician with hands resting on the tabletop. The 18B Lathe has a full 1/4 HP, 1725/3450 rpm for use on top of laboratory bench (115 Volts/60Hz). Shipped with standard dental, tapered shafts, each lathe includes a right and left chuck remover, which provides ease of removal of standard dental chucks. The 18B is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding.

$525.00

Handler introduces the 26105 SSW Washout/Boilout/ Curing Unit complete with vented cabinet. The Handler 26105 will provide your prosthetics laboratory with years of service at almost 40% savings over competitive units. The Handler is available with economical gas or electrical fuel, faucet to fill tank, heavy duty recirculating pump and four faucet washout-tank-turn on walk away de-wax dentures & partials. The Handler 26105 curing unit-holds 8 two flask compresses-16 flasks, heavy gauge stainless steel-for durability & functionality, sinks built into stainless steel top with seamless design and marine edging keeps water from running off work surface.

$5399.00