Products

Cas The Box

Cas the Box Workstation II allows for large items to be placed inside. The Cas the Box Worksation II has a clear 1/4" safety glass top, is constructed of heavy duty plastic laminated wood and uses 1/75" Vaniman hose end to adapt suction. It includes: 2"magnetic bar located at rear of unit, cushion arm rest material, vacuum port deflector and vacuum hub connector. The Cas the Box Workstation II does not come with light and has the following dimensions: 22"L X 22"W X 18"D.

$

CMP Polishing Station

CMP Polishing Station has a dual 1/3 horse power motors without quick chucks. The Polishing Station is 10 amps with 115 volts. The CMP Polishing Station includes high intensity halogen lighting, stainless steel working area, 2 speed motor and built in dust collection with cloth filters.
$

Handler 575 Polishing Station

Handler's complete new benchtop polishing system is built with heavy gauge, powder-coated steel. Dual suction motor and cartridge filters, fluorescent lights, dust collection trays, splash hoods, and 26A Red Wing polishing lathe.Each suction motor delivers 225 CFM (cubic feet per minute). Dust collection trays capture precious metals for reclamation. The adjustable clear acrylic shield protects the user from debris, and can be set at different heights to accommodate the user. The unit will filter 0.5 microns of dust and larger particles.
$1181.00

Handler 76D-3 Polishing Station with Dust Collector

A bench top polishing unit designed to provide 365 CFM through two  inlets, with a 26A Red Wing Lathe. The 76D-0 is constructed of heavy gauge sheet steel, finished in a durable, baked coating. Two 10 inches x 12 inches x 2 inches replaceable filters entrap dusts as small as 5 microns.  Two aluminum pumice/polishing pans provided.  Incandescent light sockets are on the unit, but no bulbs are provided.  Not recommended for use with stone or abrasives.  29" W x 20.5" D x 13"H
$629.99

Nevin Polishing Station

Nevin Polishing Station does not have a Lathe. The Nevin Polishing Station has a flourescent lighting, disposable paper filter and 115V. The Nevin Polishing Station has the following dimensions: 31.5"W x 19.75'D x 19.75"H.
$3999.00

Renfert Dustex Master

Renfert Dustex Master Workstation provides for a clean workstation and clear view of the workstation. The Dustex Master Workstation enables the technician to improve the quality of his work without disturbances by dust, splinters and gases. With a clear view of the restoration, the very bright illumination (standard), and the optional magnifying glass provides an ideal environment for concentrated and exact work. The Dustex Master Workstation is compact, yet spacious, has large arm inlets, spacious inner volume, and the easy-to open glass window provides much freedom of movement and efficient working conditions.
$479.00

Saratoga Polishing Station with Lathe

Saratoga Lathe has a two speed motor and has flourescent lighting. The Saratoga Lathe also has suction with cloth filters and 115V and has the following dimensions: 29.5"W x 21.25" D x 18" H.
$2199.00

Handler 211 Bench tech-rite

Handler 211 Tech-Rite Bench five drawer technician’s bench with resistop. Resistop is similar to man made slate. Available in charcoal gray color. The 211 Bench is built of heavy gauge sheet steel with heavy gauge tubular steel legs, the 211 is shipped complete with four legs with leg levelers, duplex electrical outlet, suction inlet and knock-outs for air and gas valves. Finished in baked durable coating.
$1379.00

Handler 213 Ceramist Bench

The Handler 213 Ceramist Bench has seven drawers and is designed particularly for the ceramist. In addition to the two larger side drawers which will accommodate large porcelain jars, its side cabinet contains a hinged door and compartment for a vacuum pump or other accessories. The side cabinet is shipped for assembly on the right side of the bench. The 213 Bench is built of heavy gauge sheet steel, the Tech-Rite Ceramist Bench is shipped complete with legs, duplex electrical receptacle, suction inlet and knock-outs for air and gas valves. Finished in baked, durable coating with Resistop tops.

$2149.00

Handler 215 SP single pedestal bench

The Handler 215 SP Single Pedestal Bench is a five drawer single technicians bench with Resistop tops. The 215 SP Bench is supported by a single 14" deep x 42" wide single pedestal. The single pedestal bench is 42" wide x 24 1/2" deep x 31 3/4" to work surface. The 215SP contains a 42" wide x 6 1/2" deep x 6" high riser mounted rear with one duplex receptacle, suction inlet and knock outs for air and gas valves in the vertical riser. It must be secured to the wall of the laboratory or installed to the floor as a free standing bench. Constructed of heavy gauge sheet steel and finished in a baked, durable coating.

$1549.00

Handler 215 pedestal bench

Handler 215 Pedestal Bench finished in baked, durable coating. A two technician pedestal bench contains five drawers for each technician. Benches are mounted face to face, supported by 42" wide x 17 3/4" deep pedestal with common 13" riser top. Constructed of heavy gauge sheet steel. Supplied with Resistop tops. The top containing a duplex receptacle, suction inlet and knock-outs for air and gas valves on both sides.

$2729.00

Handler 311 Bench Master Tech

Handler 311 Master Technicians Bench is the ultimate bench for the accomplished technician. Constructed of heavy gauge sheet steel, this bench is 74" wide x 24 1/2" deep x 32" high to the work surface. The 311 bench contains thirteen drawers, a 36" electrical strip, 3" suction inlet, air and gas valves and a Resistop work surface. Finished in a baked, durable coating. The work area is designed to provide maximum work space for supervision and teaching. Unit contains a 74" wide x 6 1/2" deep x 6" high vertical riser mounted in rear of the bench.

$2649.00

Handler 231 Plaster Bench

Handler 231 Plaster Bench is a seven foot bench built for use as a plaster bench. Bench contains one 35" double door cabinet, one 24" single door cabinet and one 24" four drawer cabinet combined. Cabinet top covered with Resistop, built-in 14" x 14" x 6 1/2" deep stainless steel sink with chrome plated mixing faucet, and adjacent plaster (waste) chute. 231 Bench constructed of heavy gauge sheet steel finished in a durable, baked coating. The 231 Bench has the size is 83 3/8" wide x 24" deep x 36 3/4" high to work surface.
$3539.00

Handler 235 Casting/Soldering Bench

235 Casting/Soldering Bench is a seven foot long bench designed for casting and soldering. The 235 bench consists of one 35" double door cabinet, one 24" single door cabinet and one 24" single door cabinet with tool area above door lined with transite for placement of torches and tools. The 235 cabinet’s work surface is covered with Resistop material and contains a cut-out with casting well. The cabinet size is 84" wide x 23 3/4" deep x 36 3/4" high to work surface. Available with 6" high riser in lieu of back splash making bench 29" in depth. The casting well sits 18" wide and 14" deep. Constructed of heavy gauge sheet steel and finished in a durable baked coating.
$3539.00

Handler dexterity 2000 bench

DEXTERITY 2000 Bench is a new workstation to satisfy the ergonomic requirements of the laboratory technicians. Two styles are offered: a mechanically adjustable bench and an electrically adjustable bench. The Dexterity 2000 Bench is a modern, practically designed bench which is sturdy, comfortable, and durable. Benches available in 42",48" and 60" wide at. Varying widths are available on special order. Various substraights available for tops.

$2519.00

Handler TUX007

Comes with: 19'' wide screen flat panel, data port, I pod jack and ear phone jack. Suction and in drawer inlet with safety shield and magnifier.  Duplex electrical outlet which are pre-wired to a 110 3 prong cord. Gas valve, Air Valve with air hose and air gun.  Fluorescent task lightening, work shelf and 6 drawers
$3059.00

Nevin Freedom

Nevin Freedom has a generous size stainless steel top saver and high-pressure plastic laminate top. The Freedom Bench has a AGA approved gas valve, OSHA compliant air blowgun with regulator, handpiece storage shelf and all steel construction with durable scratch and chip resistant powder coating finish. It is pre-piped for gas and air, and pre-wired for electricity.

$Call

Nevin Ergotech

Nevin Ergotech Self-Contained Workstation has an individual dust collecting system with removable suction hood and safety shield, an optional 2.5X magnifying lens, generous size magnetic vinyl top saver, solid 3/4" thick Corian top, removable, stainless steel scrap drawer, optional removable adjustable arm boards and all steel construction with durable scratch and chip resistant powder coating finish. The Ergotech Self-Contained Workstation is pre-piped for gas and air, pre-wired for electricity with AGA approved gas valve for Bunsen burner and OSHA compliant air gun with regulator. It also has drawer storage cabinet with steel roller bearings and an optional 110 watt color correct full-spectrum fixed height lighting system with 2 case pan storage shelves.

$4999.00

Nevin WS84 NEW Pedestal Bench

WS-84 New Pedestal Bench is the laboratory industry’s first practical and affordable technician workstation with a built-in dust collecting system. The Nevin WS-84 Pedestal Workstation has suction that allow up to 4 technicians to be side-by-side with a quiet, powerful, vibration-free 1 hp. brushless motor dust collector. It has a blastgate at each workstation that allows the technician to control suction at the workstation. The Pediestal Workstation has a unique cartridge filter with 75 square feet of filter area that captures particulate as small as 0.5 microns.  The Pedestal Workstation does not require legs for support so floor maintenance is easier and the technician can move his/her stool conveniently between workstations.

$10,300.00

Nevin Medalist Workstation

The Medalist Workstation by Nevin offer unusual economy and unsurpassed quality. The Medalist bench has a full range of functional features including Nevin’s state-of-the-art quiet, powerful, variable speed dust collector motor with either manual and/or automatic operation, lighted power switch, indicator lights for monitoring motor performance and filter replacement, stainless steel scrap drawer. The Medalist Bench has adjustable task lights, optional workbox shelf and optional arm boards. It also includes epoxy resin, or high-pressure plastic laminate work surface and is available in a variety of styles to fit your budget and your space. The Medalist has all steel construction with durable scratch and chip resistant powder coating finish, single workstations, pre-piped for gas and air, pre-wired for electricity, OSHA compliant air gun with regulator and drawer storage cabinet with steel roller bearings.

42" w 4 Drawers  #9542

$3599.00