Products

$Call

Nevin 4900 Curing Unit uses a touch pad to program the desired time and temperatures for each phase of the curing cycle. The Nevin 4900 Curing Unit programs two separate curing temperatures and single phase electrical current for operations. The Nevin 4900 Curing Unit allows programs to remain in memory even if power is interrupted. It has the following dimensions: 17"H X 10 ½"W X 18 ½"D. The Nevin 4900 does not need to be vented and has a hinged stainless steel cover that minimizes water evaporation. The Nevin 4900 is constructed of all stainless steel.

$2215.00

5400 Electric Washout and Cure system uses touch pad on the face of the unit to program start times, finish times and length of time for the curing cycle. The 5400 Electric Washout and Cure System accommodates 6 flask halves for washout and 12 clamped flasks for curing. It requires 220V single phase electrical current and the program remains in memory even if the power is interrupted. The Electric Washout and Cure System is constructed of stainless steel and no venting is needed for benchtop use.

$4800.00

Nevin 5402 Boilout and Cure or Denture Processing System softens wax, flask washout, boiling out and curing. The Denture Processing System is a labor-saving system for production in dental laboratories.

$5800.00

WS 30 Boilout and Cure system softens wax, boilout and curing. The WS 30 Boilout and Cure System has 4 spout washout with cabinet included.

$7150.00

Nevin Freedom has a generous size stainless steel top saver and high-pressure plastic laminate top. The Freedom Bench has a AGA approved gas valve, OSHA compliant air blowgun with regulator, handpiece storage shelf and all steel construction with durable scratch and chip resistant powder coating finish. It is pre-piped for gas and air, and pre-wired for electricity.

$call

Nevin Ergotech Self-Contained Workstation has an individual dust collecting system with removable suction hood and safety shield, an optional 2.5X magnifying lens, generous size magnetic vinyl top saver, solid 3/4" thick Corian top, removable, stainless steel scrap drawer, optional removable adjustable arm boards and all steel construction with durable scratch and chip resistant powder coating finish. The Ergotech Self-Contained Workstation is pre-piped for gas and air, pre-wired for electricity with AGA approved gas valve for Bunsen burner and OSHA compliant air gun with regulator. It also has drawer storage cabinet with steel roller bearings and an optional 110 watt color correct full-spectrum fixed height lighting system with 2 case pan storage shelves.

$4999.00

WS-84 New Pedestal Workstation is the laboratory industry’s first practical and affordable technician workstation with a built-in dust collecting system. The Nevin WS-84 Pedestal Workstation has suction that allow up to 4 technicians to be side-by-side with a quiet, powerful, vibration-free 1 hp. brushless motor dust collector. It has a blastgate at each workstation that allows the technician to control suction at the workstation. The Pediestal Workstation has a unique cartridge filter with 75 square feet of filter area that captures particulate as small as 0.5 microns.  The Pedestal Workstation does not require legs for support so floor maintenance is easier and the technician can move his/her stool conveniently between workstations.

$10,300.00

The Medalist Workstation by Nevin offer unusual economy and unsurpassed quality. The Medalist bench has a full range of functional features including Nevin’s state-of-the-art quiet, powerful, variable speed dust collector motor with either manual and/or automatic operation, lighted power switch, indicator lights for monitoring motor performance and filter replacement, stainless steel scrap drawer. The Medalist Bench has adjustable task lights, optional workbox shelf and optional arm boards. It also includes epoxy resin, or high-pressure plastic laminate work surface and is available in a variety of styles to fit your budget and your space. The Medalist has all steel construction with durable scratch and chip resistant powder coating finish, single workstations, pre-piped for gas and air, pre-wired for electricity, OSHA compliant air gun with regulator and drawer storage cabinet with steel roller bearings.

$3599.00

Nevin Polishing Station does not have a Lathe. The Nevin Polishing Station has a flourescent lighting, disposable paper filter and 115V. The Nevin Polishing Station has the following dimensions: 31.5"W x 19.75'D x 19.75"H.

$3999.00

Nevin Emergency Eyewash Station is required "where the eyes…may be exposed to injurious corrosive materials…". The Eyewash station is easy-to-install by simply removing aerator on faucet and replace with eyewash station. Eyewash kit includes 2 adaptors and is constructed of brass with durable chrome plated finish.

$95.00

Faro Wet Model Trimmer is a versatile unit that offers all the features a lab would expect from a 550W machine. Wet Trimmer requires water access. The Wet Trimmer has a special solenoid valve that automatically starts the water flow when the machine is turned on to help conserve water resources.

$1095.00

The Nevin Hydraulic Press accommodates 3 flasks. Apply pressure up to 3500psi for trial pack and final closure. This press has tempered steel construction and is Leak-proof.

$1130.00

$2600.00

9101 Pressure Pot is a low pressure pot with 2 factory pre-set safety valves on lid at 25psi. The Nevin 9101 Pressure Pot does not included a heating plate. It has a 6 quart capacity with 23 psi and is great to use for complete and partial denture fabrications, denture repairs, relines, rebases, orthodontic and periodontal appliances.

$440.00

72-Watt Bench Light provides broad ambient lighting with (2) 36-watt, 5550º K color-corrected balanced daylight compact fluorescent lamps. It is ideal for shade matching of ceramic restorations and custom staining and is also great for intricate general dental lab procedures such as implant work and die trimming. The 72-Watt Bench Light includes (2) 72- watt compact fluorescent lamps and a 5-point adjustable 16 ga. steel articulated arm. It also includes parabolic louver that provides precise light direction and eliminates glare, 1/8" thick extruded aluminum lamp housing and electronic power supply for cool, flicker-free lighting.

$618.00

The 36-Watt Bench Light is a multipurpose bench light that is compact yet powerful and can be used for traditional dental inspection with optional magnifier. It includes (2) 18- watt compact fluorescent lamps, adjustable articulated arm, parabolic glare-control louver, rigid 16 ga. steel arm, 1/8" thick extruded aluminum lamp housing and electronic power supply for cool, flicker-free lighting.

$375.00

Nevin 521 Jumbo Plaster Trap requires less frequent cleaning and saves time. It does not need tools for service and quick disconnect separates tank from sewer line. The Jumbo Plaster Trap has a translucent tank that provides easy inspection of sludge level and the tank is constructed of heavy-gauge polyethylene with the lid constructed of PVC. The dimensions of the 521 Jumbo Plaster Trap are as follows: 19" wide x 17" deep x 15" high.

$429.00

Nevin 522 Plaster Trap tank is constructed of heavy-gauge polyethylene with the lid constructed of PVC. The Plaster Tanks lid is threaded for 1 ½" fittings and has a 2 gallons capacity. The 522 Plaster Trap is easy to clean, has a pressure clamp sealing lid and tank requires only hand pressure. Its dimensions are: 12 ½" high; 10" wide at top; 7" wide at bottom (tapered).

$280.00

Nevin 523 Plaster Trap tank is constructed of copper and the lid is constructed of bronze. The Plaster Tanks lid is threaded for 1 ½" fittings and has a 2 gallons capacity. The 523 Plaster Trap is easy to clean, has a pressure clamp sealing lid and tank requires only hand pressure. Its dimensions are: 12 ½" high; 10" wide at top; 7" wide at bottom (tapered).

$440.00

Measurements:  21"W x 18"H x 8"D

Capacity:  25# Each Compartment

$235.00